Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 15 de 15
Filter
1.
Braz. j. oral sci ; 21: e225334, jan.-dez. 2022. ilus
Article in English | LILACS, BBO | ID: biblio-1384158

ABSTRACT

Aim This study aimed to analyze the influence of finishing and polishing (F/P) protocols on resin surface through roughness (Ra) values and laser scan microscopy observations. Methods Forty-eight (n=48) resin specimens were sorted into four groups (n=12), according to the type of resin used: Filtek Z250 (Z250), Filtek Z350 (Z350), Filtek One Bulk Fill (BF), Filtek P60 (P60). The specimens were sorted into six groups according to the type of F/P system used (n=2/group): Control group, Diamond bur (KG Sorensen), Soflex Pop-On Discs (3M ESPE), Soflex Spiral (3M ESPE), Dura Gloss (American Burs), and Praxis (TDV). Results The highest roughness values (Ra) were attributed to BF group for all F/P systems, except for the Soft-Lex PopOn discs. The Soft-Lex PopOn, Spiral, and Praxis discs presented a better performance for the surface treatment of the tested composite resins. Regardless of the restorative material, the use of diamond bur or single-step abrasive rubber (Dura Gloss) were associated with the highest Ra values. Conclusion The effect of F/P systems on Ra is material-dependent and instrument or system-dependent.


Subject(s)
Microscopy, Confocal , Composite Resins , Dental Materials , Dental Polishing
2.
Article in English | LILACS, BBO | ID: biblio-1422285

ABSTRACT

Abstract Objective: To analyze the self-reported need of patients compared to professional indications for tooth whitening. Material and Methods: Initially, 58 undergraduate students responded to a form that highlighted the question: "Do you think you need to have your teeth whitened?" Among those who answered positively to the previous question, ten individuals were photographed with their smiles. In addition, they were asked to point out, on the Vita 3D-Master scale, which color they believed their teeth had, a value that was compared to the actual color obtained by a spectrophotometer. Finally, the photographs were presented to dentists, who were asked about the indication or not of the whitening treatment. Results: Most interviewees (63.8%) self-reported the need for whitening, as well as there was a greater incidence of a positive indication among professionals (53.9%). Pearson's Chi-square test revealed a relationship between patient gender and the training course on the desire to have teeth whitened. Among the professionals, the specialty, as well as time since graduation, interfered in the indication for whitening. Conclusion: Professionals and patients share the aesthetic ideal directly related to light teeth; most patients self-perceive the color of their teeth darker than it actually is; the opinion about the color of the teeth has an extremely subjective character and varies greatly from one professional to another (AU).


Subject(s)
Humans , Male , Female , Adolescent , Adult , Middle Aged , Tooth Bleaching/methods , Spectrophotometers , Photography, Dental/methods , Esthetics, Dental , Self-Testing , Social Perception , Students, Health Occupations , Chi-Square Distribution , Cross-Sectional Studies/methods , Surveys and Questionnaires
3.
RGO (Porto Alegre) ; 66(4): 391-397, Oct.-Dec. 2018. graf
Article in English | LILACS | ID: biblio-984927

ABSTRACT

ABSTRACT Bulk Fill Composite resins are restorative materials that present low tension and polymerization shrinkage, allowing them to be inserted in a single increment of up to 4 mm of thickness, in a restorative cavity. This paper aims to report a clinical case of restorations done on posterior teeth with Bulk Fill restorative system, using selective acid-etching with self-etch adhesive system. Patient, male, 24 years old, presented a carious lesion on the occlusal surface of dental element 37 and an occlusal unsatisfactory amalgam restoration, on element 36. A restorative treatment with Universal Bond 3M / ESPE and bulk fill composite resin (3M / ESPE) was done. According to the case described, it was possible to observe that the materials and techniques used restored the form and function of the teeth involved, preserving pulp vitality with a satisfactory aesthetic result. The bulk fill resins employed offer practicality and decrease clinical time, with satisfactory clinical applicability in the aesthetic and functional rehabilitation of posterior teeth.


RESUMO Resinas compostas do tipo Bulk fill constituem um material restaurador que apresenta baixas tensão e contração de polimerização, podendo ser inserido em incremento único, de até 4mm de espessura, numa cavidade. Este trabalho objetiva relatar um caso clínico de restaurações em dentes posteriores com o sistema restaurador Bulk fill, empregando o condicionamento ácido seletivo com sistema adesivo autocondicionante de emprego universal. Paciente, sexo masculino, 24 anos, apresentava lesão de cárie na face oclusal do elemento dentário 37 e restauração oclusal de amálgama insatisfatória, no elemento 36. Sendo proposto e realizado tratamento restaurador com Single Bond Universal 3M/ESPE e resina composta bulk fill (3M/ESPE). De acordo com o caso descrito, foi possível observar que os materiais e técnica empregados restituíram forma e função dos dentes envolvidos, preservando a vitalidade pulpar com estética considerada satisfatória. As resinas bulk fill empregadas oferecem praticidade e diminuição do tempo clínico, tendo aplicabilidade clínica satisfatória na reabilitação estética e funcional de dentes posteriores.

4.
Odontol. clín.-cient ; 11(3): 259-264, Jul.-Set. 2012. ilus
Article in Portuguese | LILACS | ID: lil-744208

ABSTRACT

Com o crescente apelo estético da sociedade, um dos principais procedimentos realizados pelos cirurgiões-dentistas consiste na troca de restaurações de amálgama de prata, de elementos posteriores, por materiais que agreguem resistência mecânica e propriedades ópticas semelhantes à estrutura dental sadia. Para reabilitar elementos dentais extensamente comprometidos, muitas vezes necessitamos indicar procedimentos indiretos, e, para isso, dispomos de cerômeros e cerâmicas, embora tal alternativa não se apresente viável para a grande parcela da população, tendo em vista ser de alto custo. O presente trabalho tem por objetivo abordar a utilização de resinas compostas como alternativa para a confecção de restauração do tipo onlay por meio de uma breve revisão de literatura e de um relato de um caso clínico realizado na Clínica de Dentística 2 da UFPE.


With the society's increasing aesthetic appeal, the amalgam restoration changes from posterior teeth with materials that add strength and optical properties similar to the healthy tooth structure has been one of the most performed procedures by dentists. To rehabilitate dental elements widely compromised, we often need to indicate indirect procedures, and, for that kind of necessity, we have ceromers and ceramics. However, because of its high cost, this alternative is not viable for most people. The aim of this study is to address the use of composite resins as an alternative to these onlay restorations, through a brief literature review and clinical case report at the Clinic of Dentistry 2, UFPE.

5.
Rev. bras. educ. méd ; 36(2): 180-187, abr.-jun. 2012. ilus, graf, tab
Article in Portuguese | LILACS | ID: lil-646858

ABSTRACT

A busca pelo conhecimento das características e da opinião dos estudantes do nível superior fornece importantes subsídios para o planejamento e reorganização do desenvolvimento acadêmico. Com o objetivo de traçar o perfil do aluno do Centro de Ciências da Saúde da Universidade Federal de Pernambuco (UFPE), foram distribuídos formulários aos acadêmicos do 2º período, contendo perguntas referentes aos seus aspectos socioeconômicos e pessoais. O perfil dos estudantes (n = 210) caracterizou-se por um predomínio feminino, com idades entre 19 e 21 anos, provenientes de escolas privadas e classes sociais economicamente mais favorecidas, que receberam grande influência do núcleo familiar na escolha da profissão. A maioria dos estudantes não estava matriculada nos cursos de primeira opção, porém possuía alta expectativa com relação ao curso, considerando-o correspondente às suas expectativas. Após formados pretendem realizar algum curso de pós-graduação e trabalhar no serviço público. No entanto, persiste um problema relativo à escolha da profissão, regulada pela condição socioeconômica e influência familiar.


Carrying out surveys that attempt to understand the characteristics and opinions of students at university level may provide important information for planning and reorganizing academic development. In order to profile the students of the Center for Health Sciences, at the Federal University of Pernambuco, questionnaires were distributed to the academics in the second term of the course, containing questions regarding their socio-economic and personal aspects. The profile of students (n = 210) was characterized by a predominance of females, aged between 19 and 21 years, who had been to private schools, were from the most economically advantaged social classes, and had been greatly influenced by their family regarding career choice. Most students were not enrolled in the courses they had chosen as their first option, but had high expectations about the course, and considered that the course met their expectations. After finishing the course, most students intend to take a postgraduate course and work in public service. One problem that remains concerning the choice of the profession, is that it might be determined by socio-economic status and family influence.

6.
Full dent. sci ; 2(5): 103-107, 20100815.
Article in Portuguese | LILACS, BBO | ID: biblio-850819

ABSTRACT

O clareamento dental é um dos procedimentos estéticos mais solicitados atualmente. As técnicas de clareamento para dentes vitais são: o clareamento supervisionado (caseiro); e o clareamento de consultório, cuja técnica associa ou não o uso de fonte de luz com um gel mais concentrado. A ativação, utilizando fontes de luz, do peróxido de hidrogênio na técnica do consultório pode ser realizada através de aparelhos emissores de LED (Laser Emiting Diode), sistemas híbridos LED/Laser, laser, luz halógena ou arco de plasma. Este tema é bastante controverso na atualidade, portanto é importante que o profissional saiba identificar os efeitos que a utilização de uma fonte de luz auxiliar pode causar tanto sobre o gel clareador quanto sobre a estrutura dental. Neste trabalho foi realizada uma revisão de literatura nas bases de dados da LILACS, Google Acadêmico, SciELO, PubMed e MEDLINE sobre o emprego e a indicação das fontes luminosas, que são bastante utilizadas no clareamento de consultório. Essa técnica popularizou-se graças aos excelentes resultados alcançados, maior segurança e controle por parte do profissional, entretanto devemos ter cuidado para não gerar calor durante a aplicação destas fontes de luz


The dental bleaching is one of the most currently requested aesthetic procedures in dentistry. The techniques for bleaching vital teeth are: at home bleaching and in-office whitening, which procedure associates or not to the use of light source with a more concentrated gel. The hydrogen peroxide activation using light sources at in-office method may be conducted by the LED (Laser Diode Emiting), hybrid systems LED / Laser, laser, halogen lamp or plasma arc. This topic is very controversial nowadays, so it is important that professionals learn to identify the effects that the use of a light source may assist both the bleaching gel and the tooth structure. In this study, It was conducted a review of current literature in databases from LILACS, Google Scholar, SciELO, PubMed and MEDLINE about the use and indication of light sources, which are much used in the in-office bleaching


Subject(s)
Tooth Bleaching/instrumentation , Tooth Bleaching/methods , Lasers , Light , Hydrogen Peroxide/chemistry
7.
Rev. ABO nac ; 19(2): 101-107, abr.-maio 2011. tab, ilus
Article in Portuguese | LILACS, BBO | ID: lil-667635

ABSTRACT

Introdução: O objetivo desde trabalho é avaliar a influência do tipo de agente de união e da dentina radicular (1/3 cervical; médio e apical) sobre a cimentação adesiva de pinos estéticosde fibra de vidro. Métodos - Foram utilizadas 27 raízes de dentes humanos, divididas em 03 grupos de acordo com o agente cimentante: G1- RelyX Unicem(3M / ESPE); G2- RelyXARC(3M / ESPE) + Adper Single Bond 2(3M / ESPE); G3- Cement-Post(Angelus) + AdperSingle Bond 2(3M / ESPE). Após a cimentação, as raízes foram seccionadas transversalmente em três discos (1,0 ± 0,2 mm de espessura) e submetidos a ensaio “push out”. Resultados - Os valores médios de tensão de retenção em mega pascal (MPa) foram: G1: 1/3 cervical- 7,6;1/3 médio-8,9; 1/3 apical-11,1; G2: 1/3 cervical-2,4; 1/3 médio-3,8; 1/3 apical-7,4; G3: 1/3cervical-3,3; 1/3 médio-3,2; 1/3 apical-7,8. O teste de Kruskal-Walis (α=0,05) evidenciou queapesar do G1 (RelyX Unicem - 3M / ESPE) ter apresentado maiores valores de retenção nos três terços radiculares, esta superioridade só foi estatisticamente significante nos terços cervicale médio; os valores de retenção dos Grupos 2 e 3 não foram diferentes estatisticamente entre si.Conclusão - O cimento autoadesivo RelyX Unicem (3M / ESPE) apresentou os maiores valores de resistência adesiva, com diferença estatisticamente significativa nos terços cervical e médio.


Introduction: The objective of this article is to evaluate the influence of the cement type and root dentin (1/3 cervical; medium; apical) on the adhesive cementation of glass fiber aesthetic posts. Methods - They were used 27 roots from human teeth, divided in three groups according the cement agent: G1- RelyX Unicem, 3M / ESPE; G2- RelyX ARC, 3M / ESPE + Adper SingleBond 2, 3M / ESPE; G3- Cement-Post, Ângelus + Adper Single Bond 2, 3M / ESPE. After cementation, the root were cross sectioned in three discs (1,0 ± 0,2 mm high) and submitted topush-out test. Results - Mean values of tension (MPa) of retention were: G1 cervical 1/3: 7,6;medium 1/3: 8,9; apical 1/3 11,1; G2 cervical 1/3: 2,4; medium1/3 3,8; apical 1/3: 7,4; G3cervical 1/3: 3,3; medium1/3: 3,2; apical 1/3 7,8. Kruskall-Walis Test (α=0,05) showed thatalthough G1(RelyX Unicem - 3M / ESPE) had presented higher values of retention at the three root thirds, this superiority was statistically significant only in cervical and medium thirds;the values of retention in Goups 2 and 3 didn´t were statistically different between each other.Conclusion - The self-adhesive cement RelyX Unicem (3M / ESPE) presented the highest valuesof adhesive strength, with statistically differences at cervical and medium thirds.


Subject(s)
Cementation , Dental Pins , Mechanical Phenomena , Resin Cements
8.
Rev. paul. odontol ; 32(3): 15-19, jul.-set. 2010. tab
Article in Portuguese | LILACS, BBO | ID: lil-578136

ABSTRACT

A hipersensibilidade dentinária é definida como uma resposta dolorosa curta e aguda, a diferentes estímuos que normalmente não causariam dor em um dente sadio. Possuietiologia multifatorial, porém, se instala principalmente quando a dentina localizada na região cervical do dente fica exposta ao meio bucal. Atualmente, para o tratamento da hipersensibilidade dentinária, são utilizadas substancias que promovem a oclusão dos canalículos dentinários expostos ou que atuam diretamente nas terminações nervosas intrapulpares evitando a despolarização da membrana axonial. Desta forma, o presente trabalho tem por objetivo revisar a literatura sobre o tema com enfoque clínico voltado para a tomada de decisão terapêutica.


The dentin hypersensitivity is defined as a brief and acute pain response to different stimuli that normally would not cause pain in a sound tooth. It has a multifactorial etiology; however, it specially occurs when the dentin at the cervical region of the tooth is exposed to the oral environment. Currently, many substances are being used to promote occlusion of the exposed dentinal canaliculi or that act directly on the intra pulpar nerve endings avoiding depolarization of the membrane axonial. Thus, this study aims to review the literature on the subject and foccus toward clinical decision-making.


Subject(s)
Toothache , Dentin Permeability , Dentin Sensitivity
9.
RFO UPF ; 14(2): 168-173, maio-ago. 2009.
Article in Portuguese | LILACS | ID: lil-527860

ABSTRACT

A atual filosofia odontológica de máxima preservação e mínima intervenção tem aumentado o interesse por métodos de preparos cavitários ultraconservadores. Técnicas convencionais que utilizam instrumentos rotatórios muitas vezes provocam desconforto, uma vez que geram calor, pressão, vibração e ruído. Esse fato motiva a sua substituição ou associação a procedimentos como instrumentação ultrassônica, laser de alta potência, microabrasão a ar e soluções químicas, os quais são mais confortáveis para os pacientes, porque reduzem a necessidade de anestesia e preservam maior quantidade de estrutura dentária sadia. Esta revisão de literatura aborda métodos alternativos para a confecção de preparos cavitários em dentística, destacando vantagens e desvantagens, com ênfase nos métodos que empregam as soluções químicas. Foi possível concluir que, segundo o estágio técnico-científico atual, as soluções químicas se destacam por proporcionarem maior conforto ao paciente, além de promoverem seletividade na remoção de tecido dental infectado e não interferirem na qualidade adesiva das restaurações.


The current philosophy of maximum preserving and minimum intervention has increased the interest in methods of ultraconservations cavities preparations. Conventional techniques that use rotary instruments often cause discomfort as they generate heat, pressure, vibrationand noise. This fact that motivates the substitution or association with the procedures ultrasonic instrumentation,high-power laser, micro air-abrasion and chemical solutions, which are more comfortable for patients because it reduces the need for anesthesia and preserve greater quantity of healthy tooth structure. This review of literature will address alternative methods to make cavities preparations in Dentistry, high lighting advantages and disadvantages, with emphasis on methods that employ chemical solutions. It was possible to conclude that, according to the techno-scientific current stage, the chemical solutions are distinguished by providing greater comfort to the patient as well as promoting selectivity in the removal of infected tissue dental and not interfere with the quality of adhesive restorations.


Subject(s)
Dental Cavity Preparation , Dentistry
10.
Odontol. clín.-cient ; 8(2): 175-181, abr.-jun.2009. ilus
Article in Portuguese | LILACS, BBO | ID: lil-520594

ABSTRACT

O sistema adesivo autocondicionante é, atualmente, utilizado em diversas situações dentro da Odontologia devido à sua eficácia inquestionável, relacionada tanto à sua boa resistência de união quanto ao seu modo de utilização, necessários a todos os procedimentos restauradores. Diantedas suas indicações, as restaurações em dentes posteriores caracterizam-se como uma das mais importantes relacionadas a essa atual tecnologia. É bem sabido que o estabelecimento de um correto diagnóstico e planejamento, bem como o conhecimento dos materiais que serão utilizados, são etapas fundamentais para o sucesso do tratamento. E, o uso do sistema adesivo autocondicionantes além de garantir as vantagens alcançadas pelos sistemas convencionais, permitindo menor desgaste de estrutura dental e minimizando os efeitos da contração de polimerização e, consequentemente infiltração marginal. também garante vantagens como uniformidade no padrão da superfície condicionada e diminuição do seu tempo de aplicação o que, leva a diminuição do tempo clínico do tratamento, aumentando o conforto do paciente.Assim, o presente trabalho tem o objetivo de discutir as possíveis vantagens e limitações da utilização de sistema adesivos autocondicionantes, de acordo com as possibilidades atualmente disponíveis para o restabelecimento da saúde e estética dos elementos dentais, conhecendo melhor estes materiais e suas aplicações dentro da Dentística.


The self-etch adhesive system use is, currently, enclose in a diversity of situations inside Dentistry because of its unquestioned effectivenes related both to their good resistance to union about its mode of use, necessary to all restorative procedures. Ahead of your indications, the restoration in posterior teeth are frequently appearing like one of the most important option for use of this actual technology. Well, it is known that the establishments of a correct diagnosis and planning, as well as the knowledge of the materials that will be used, are basic stages for the success of the treatment. And, the use of the self-etch adhesive system beyond guaranteeing the advantages reached for the conventional systems, allowing less wastage of the dental structure and minimizing the polymerization contraction effect and, consequently marginal infiltration, also guarantees advantages as uniformity in the pattern of conditional surface and reduction of its time of application, which leads to reduction in the time of clinical treatment, increasing the comfort of the patient. So, this work has the objective to discuss the possible advantages and limitations of the self-etch adhesive systems uses, agreeing with the currently available possibilities for the reestablishment of the health and dental elements aesthetic, better knowing these materials and its applications inside of the Dentistry.


Subject(s)
Dental Restoration, Permanent , Dentin-Bonding Agents
11.
Odontol. clín.-cient ; 7(4): 357-362, out.-dez.2008. ilus
Article in Portuguese | LILACS, BBO | ID: lil-505605

ABSTRACT

A aparência do sorriso tem grande impacto na vida dos indivíduos, afetando desde o convívio social até relações profissionais. Assim a Odontologia Estética, com o passar do tempo, tem evoluído em busca de materiais e técnicas restauradoras que mimetizem o aspecto natural dos elementos dentários. Um dos saltos qualitativos foi conseguido com o emprego da nanotecnologia aos compósitos restauradores que possibilitou o surgimento das resinas com nanopartículas. Atualmente os materiais "nano" vem despontando no mercado, graças ao marketing das partículas nanométricas, relacionando-as com os resultados obtidos em testes laboratoriais. Entretanto será que estes compósitos são a única ou melhor escolha para procedimentos restaraudores estéticos anteriores? O presente trabalho tem o objetivo de abordar o atual estágio das resinas compostas para a realização de restauraçõesestéticas em dentes anteriores, ressaltando o desempenho dos compósitos em pesquisas, bem como a influências destas no restabelecimento morfo-estético-funcional dos elementos anteriores, como também, apresentar um caso clínico de fechamento diastema anterior mediano, onde a técnica restauradora direta foi realizada como alternativa ao tratamento ortodôntico.


The smile appearence has a great impact on people's lives, affecting not only social life but also professional relationships. Therefore the aesthetic dentistry, along the years, has developed a lot through the research for materials and restorative tecchniques that copy the natural aspect of the human teeth. One of the biggest leaps was achieved through the union of nanotechnology and restorative composites, what has made possible the appearing of the nanofil composite resins. Nowadays these new materials have been arising in the dental market, thanks to the nanocomposites, relating them to the results obtained in laboratorial tests. However, will these composites be the best alternative to aesthetic restorative procedures? The aim of this study is to approach the resin's present situation for the achievement of aesthetic restorations in anterior teeth, standig out the composite's performance through researches, as well as the influence they have upon the morpho-aesthetic-functional anterior teeth's re-establishment. Also, in this study we present an anterior diastema closure case report, in which the direct restorative technique was used as an alternative to the orthodontic treatment.


Subject(s)
Composite Resins , Dental Restoration, Permanent , Esthetics, Dental , Nanotechnology
12.
Odontol. clín.-cient ; 7(3): 235-239, jul.-set.2008. tab
Article in Portuguese | LILACS, BBO | ID: lil-512105

ABSTRACT

A técnica supervisionada de clareamento dental representa uma alternativa para reversão química do escurecimento dentário, sendo realizada com a aplicação, sobre os dentes, do peróxido de carbamida, em concentrações variadas, com o auxílio de moldeiras personalizadas. Este trabalho avaliou clinicamente a efetividade e segurança de uso do peróxido de carbamida em duas concentrações, quando aplicados com moldeiras individualizadas confeccionadas com ou sem alívio na face vestibular. Foram selecionados 26 pacientes, que se submeteram ao clareamento dental com peróxido de carbamida a 16% (arco suprior) e a 10% (arco inferior). As moldeiras foram confeccionadas com alívio apenas nos hemi-arcos esquerdos (superior e inferior) e os pacientes foram divididos aleatoriamente em dois subgrupos, onde o primeiro realizou o tratamento por 02 horas/dia e o segundo por 04 horas/dia. Os resultados do estudo evidenciaram que não houve diferenças significativas, após 14 dias de tratamento clareador, entre os grupos estudados. Entretanto, foi possível observar que a concentração de 16% empregada por horas/dia foi responsável por uma maior incidência de sensibilidade trans-operatória, assim como de leve irritação gengival. Concluindo-se que: as concentrações de peróxido de carbamida 10% e 165 foram efetivadas para o clareamento de dentes naturalmente escurecidos quando usadas, por um período de 14 dias, em moldeiras com ou sem alívio vestibular; e que quanto maior a concentração e o tempo de exposição ao agente clareador maior a possibilidade dentária trans-operatória e irritação gengival.


Home tooth bleaching represents an alternative to chemical reversal of natural teeth darkening, through the application of the carbamida peroxide in varied concentrations and with the help of customed trays. This work evaluated clinically the effectiveness and safety of two different concentrations of carbamide peroxide, when applied with individualized trays made with or without relief on the labial surface. Twenty-six patients were selected and submitted to tooth bleaching with 16% carbamide peroxide (superior dental arch) and 10% (inferior dental arch). The relief of the trays was applied exclusively in the semi-arches. The patients were randomly divided into two subgroups: the first subgroup was exposed to two hours daily, and the other one four hours daily. There was no significant evidence of differences between the studied groups after 14 days of bleaching treatment. However, it was possible to observe that the concentration of 16% employed for 04 hours/day was responsible for a higher incidence of trans-operative sensitivity, as well as mild gingival irritation. In conclusion, the concentrations of carbamide peroxide 10% and 16% were effective for the bleaching of naturally darkened teeth when used for a period of 14 days in trays with or withoutlabial relief; and the greater the concentration and time of exposure to the whitening agent, the greater the possibility of trans-operative sensitivity and gingival irritation.


Subject(s)
Humans , Tooth Bleaching , Esthetics, Dental , Peroxides/adverse effects
13.
Rev. odonto ciênc ; 21(53): 238-244, jul.-set. 2006. ilus, tab, graf
Article in Portuguese | LILACS, BBO | ID: lil-457364

ABSTRACT

Este trabalho procurou avaliar o efeito do ascorbato de sódio na aceleração da liberação do oxigênio residual em esmalte e dentina de dentes pós-clareados através de testes de infiltração marginal em restaurações de resina composta microhíbrida com tecnologia adesiva convencional e auto-condicionante. Para o experimento foram realizadas cavidades estritamente proximais em 40 terceiros molares hígidos extraídos de humanos. Os dentes foram distribuídos em 08 grupos: IA (controle) - sem clareamento, restaurados com o sistema adesivo Stae SDI® e a resina composta Glacier SDI®; lB - clareados e restaurados imediatamente com o sistema adesivo Stae SDI® e a resina composta Glacier SDI®; lC - clareados, tratados imediatamente com o ascorbato de sódio a 10% e restaurados com o sistema adesivo Stae SDI® e a resina composta Glacier SDI®; lD - clareados e restaurados após 15 dias com o sistema adesivo Stae SDI® e a resina composta Glacier SDI®; 2A (controle) - sem clareamento, restaurados com o sistema adesivo Prompt L-pop 3M/ESPE® e a resina composta Filtek Z250 3M/ESPE®; 2B - clareados e restaurados imediatamente com o sistema adesivo Prompt L-pop 3M/ESPE®; 2C - clareados, tratados imediatamente com ascorbato de sódio a 10% e restaurados com o sistema adesivo Prompt L-pop 3M/ESPE®; 2D - clareados e restaurados após 15 dias com o sistema adesivo Prompt L-pop 3M/ESPE®. Os resultados, submetidos a analise estatística através do teste de Kruskal-Wallis, revelaram que o ascorbato de sódio possibilita a aceleração da remoção do oxigênio residual da dentina e do esmalte em dentes pós-clareados melhorando o selamento marginal das restaurações.


Subject(s)
Humans , Dentin-Bonding Agents , Tooth Bleaching/adverse effects , Dental Leakage , Dental Restoration, Permanent
14.
Odontol. clín.-cient ; 4(3): 207-211, set.-dez. 2005. tab
Article in Portuguese | LILACS, BBO | ID: lil-437455

ABSTRACT

Avaliou-se a permeabilidade do esmalte bovino exposto a diferentes concentrações de peróxido de hidrogênio (10% e 35%) e peróxido de carbamida (TO%, 16% e 20%), sendo empregados de forma contínua, ou intercalada por saliva artificial. O grau de permeabilidade foi determinado por meio de escores, através da penetração do corante na estrutura dentária. Os resultados demonstraram que a exposição à saliva apresentou um importante papel na redução da permeabilidade do esmalte dentário durante o tratamento clareador, e que o emprego de agentes clareadores por tempos excessivos pode aumentar significativamente esta permeabilidade


Subject(s)
Animals , Tooth Bleaching/adverse effects , Dental Enamel , Hydrogen Peroxide , Peroxides , Dental Enamel Permeability
15.
SELECTION OF CITATIONS
SEARCH DETAIL